HA INJECTABLE MOISTURISER GUIDE
- Gerard
- 1 day ago
- 11 min read
Updated: 8 hours ago
Hyaluronic injection to remodel Sagging Skin & Stimulate Collagen. Cost, safety, results and downtime
Book An Appointment for HA Injectable Moisturiser treatment for SGD899 (2ml)
What is Injectable Moisturiser?
HA injectable moisturiser is one of the injectable skin care treatments in Singapore focused on skin laxity and skin hydration.
Also known as 逆時針, it is the first “injectable skincare” to target skin laxity through the production of elastin, collagen, and adipocytes (fat stem cells).
This anti-ageing injectable has one of the highest concentrations of hyaluronic acid (32 mg/mL).
The treatment is effective due to the presence of L-HA and H-HA. This HA hybrid enables hyaluronic acid to be released slowly and for a longer duration, enabling bioremodeling.
The slow release of HA initiates the stimulation of four distinct varieties of collagen and elastin during this time.
Stimulate Collagen & Elastin
How does Injectable Moisturiser work?
The quantity of collagen and elastin produced helps to maintain our skin’s elasticity. Higher levels of collagen will result in a firmer skin texture with fewer wrinkles.
During the aging process, our body will produce lower levels of collagen & elastin. As such, hyaluronic acid production decreases, causing our skin to be saggy with more obvious fine lines.
Injectable moisturiser has the ability to stimulate the production of 4 different kinds of collagen & elastin to repair the damage from ageing.
With the highest concentration of molecular weight hyaluronic acid (32 mg/mL), it will ensure the hydration that your skin desperately needs.
This is suitable for patients (over 30 years old) suffering from sagging, ageing skin.
It has the capability to prevent skin from losing volume and becoming thinner.
Treatment Benefits
Injectable moisturiser characteristics:
Bio-remodel face
Lifting for anti-aging
Improve hydration
Stimulation of collagen & elastin
Reduce wrinkles & fine lines
Injectable moisturiser steps:
Face assessment by doctor based on needs & recommendations
Topical numbing cream will be applied prior to procedure to reduce pain
30 mins Injections performed by approved Doctor
Minimal downtime
Recommended Skin Type for Injectable Moisturiser
Recommended if you are suffering from AGING SKIN, SKIN LAXITY, FINE LINES, WRINKLES, DEHYDRATED SKIN AND DULL TIRED SKIN
Blackheads
Oily Enlarged Pore
Pigmentation
 |  |  |
What is Injectable Moisturiser used for?
When Should You Start Injectable Moisturiser?
Injectable moisturiser can be considered by individuals who are beginning to notice early signs of skin ageing, such as reduced skin elasticity, dullness, or fine lines.
While there is no fixed age to start treatment, many patients choose to begin in their late 20s to early 40s as part of a preventative or maintenance approach to skin quality. It may also benefit those experiencing age-related skin changes, including dryness or loss of firmness.
As with any injectable treatment, it is best to consult a qualified medical professional who can assess your skin condition and determine if injectable moisturiser is suitable for your goals and timing.
HA bioremodeling injection is minimally invasive and delivers fantastic results. It can remodel your skin laxity, reducing wrinkles & fine lines in a short 30 minutes.
Where can Injectable Moisturiser be injected?
HA injectable moisturiser is most commonly injected into the face, particularly the mid- to lower face, to improve hydration, elasticity, and overall skin quality. It is administered using a precise technique that allows the product to spread evenly across the treated area.
In addition to the face, it can also be used on the neck, décolletage, hands, and selected body areas such as the upper arms and abdomen, depending on individual skin concerns and assessment by a medical professional.
Face
Injectable moisturiser for Face
The face is the most commonly treated area. It is typically used on the mid to lower face, including the cheeks, smile lines, and jawline, to improve skin hydration, elasticity, and texture.
Unlike traditional dermal fillers, it does not add volume but instead works by stimulating collagen and elastin production.
This makes it suitable for individuals seeking overall skin quality improvement. The treatment is usually performed using the Bio Aesthetic Points (BAP) technique to ensure even distribution.
Injectable moisturiser For Body
In some cases, injectable moisturiser may be considered for areas of the body that experience skin laxity or a loss of firmness, such as the upper arms, abdomen, inner thighs, or knees.
These treatments are regarded as off-label and require a customised approach based on individual skin needs.
It is not intended for fat reduction or contouring but rather for improving skin tone and texture.
A qualified medical doctor will evaluate the suitability of body treatments during a clinical consultation.
Injectable moisturiser for Neck
The neck area is often one of the first places to show visible signs of skin ageing, such as fine lines, crepiness, and reduced firmness.
It can be injected into the neck to support hydration and improve skin texture over time.
The product spreads naturally within the tissue, making it ideal for treating large surface areas like the front and sides of the neck.
A medical consultation is necessary to assess the skin condition and determine if it is appropriate for this area.
Injectable moisturiser for Hands
Hands are commonly affected by skin thinning and dryness as part of the natural ageing process.
Injectable moisturiser may be injected into the backs of the hands to enhance skin hydration and promote smoother, firmer texture.
The treatment helps improve overall skin quality without changing the shape or volume of the hands.
It is typically recommended for individuals who are looking to address visible signs of skin ageing while maintaining a natural appearance.
Injectable Moisturiser Singapore Price
Injectable moisturiser prices in Singapore range cannot be publicly displayed due to regulations. Please WhatsApp us for more information.
Since there are many “fake” products on the market, ask the clinic to prove the authenticity before injecting.
At MODE Medical Clinic, we are a premium clinic and only use 100% authentic injections. We believe in price transparency and adhere to the highest standards of safety.
Book An Appointment for HA Injectable Moisturiser treatment for SGD899 (2ml)
Injectable Moisturiser vs PDRN Injection vs Skinbooster
Injectable Moisturiser vs PN Skin Healer
Compared to PN Skin Healer, injectable moisturiser has the ability to activate collagen and elastin production at a deeper level.
Polynucleotide works by stimulating collagen in the dermis’ superficial layer, which reduces the appearance of pores and fine wrinkles.
With its high content of hyaluronic acid, injectable moisturiser is an effective treatment for skin hydration, while polynucleotide does not have a hydrating effect.
In terms of treatment experience, bioremodelling injection only requires 10 injection sites, compared to full-face treatment with PN healer. There will be a lower risk of bruising and faster downtime and healing time.
The sole drawback is that its injection technique is concentrated around the lower part of the face, leaving untreated areas above the cheek.
For the best anti-ageing results, both injectables can be combined for a more comprehensive experience.
What are the Injection points of Injectable Moisturiser?
Injectable moisturiser can be injected on the face and neck.
Injectable moisturiser developed an application technique, Bio Aesthetic Point (BAP) for the lower face and neck.
The BAP are injection points chosen to avoid nerve branches and large blood vessels. These points are carefully selected to ensure:
Better spreadability of the HA acid, covering all the treatment areas
Minimize risk of bruising as large blood vessels are avoided
For injections on the face, there are a total of 10 BAP (5 points on each side)
For injections on the neck, there are 10 BAP points.
Can I do Injectable Moisturiser with other aesthetic treatments?
For optimal results, combine anti-ageing treatments like HIFU, Botox, fillers, and laser toning.
Injectable Moisturiser with Botulinum Toxin
Botulinum toxin can weaken the muscles responsible for wrinkles, allowing the skin to tighten. The combination will eliminate fine lines and wrinkles while stimulating the production of collagen & elastin.
Combined with Laser Toning
It can be combined with energy devices such as lasers to treat pigmentation, skin renewal, and overall skin tightening.
Combined with HIFU
HIFU is an excellent anti-ageing treatment. It can stimulate three layers beneath the skin, thereby initiating the production of collagen. The overall effect will accelerate collagen production for an optimal facelift.
Combined with Dermal Filler
Combining with fillers can treat skin laxity issues while providing added contours to sunken parts of your face. The main ingredient for both treatments is hyaluronic acid, which can provide a synergistic approach to target anti-ageing issues.
Am I suitable for Injectable Moisturiser?
Book An Appointment for HA Injectable Moisturiser treatment for SGD899 (2ml)
FAQs about Injectable Moisturiser Singapore
Why is product authentication crucial for HA injectable moisturiser safety?
Counterfeit products are a significant concern in the aesthetic industry, with fake versions lacking the precise L-HA and H-HA hybrid technology essential for proper bioremodelling.
Authentic products come with specific batch numbers, holographic seals, and verification systems that reputable clinics should readily show patients.
Using non-authentic products can result in poor outcomes, increased side effects, or even serious complications, including infections or permanent damage.
Always ask to see product authentication before treatment and choose clinics that provide full transparency about their sourcing and storage procedures.
Can HA injectable moisturiser effectively treat neck aging and décolletage concerns?
The neck area uses a modified BAP technique with 10 specific injection points designed for the unique anatomy of neck tissues.
HA injectable moisturiser is particularly effective for neck treatments because it addresses the thin, delicate skin that shows aging signs early.
The treatment helps improve skin texture, reduces crepiness, and provides deep hydration that’s especially beneficial for the neck’s naturally drier skin.
Results typically appear gradually over 4-6 weeks as the skin’s structure improves, with many patients noting significant improvement in neck firmness and smoothness.
How does the 32mg/mL concentration benefit my skin compared to lower concentrations?
HA injectable moisturiser contains one of the highest concentrations of hyaluronic acid at 32mg/mL, compared to regular treatments that typically contain 20-24mg/mL.
This higher concentration, combined with the unique L-HA and H-HA hybrid technology, allows for superior tissue integration and longer-lasting hydration effects.
The concentrated formula means fewer treatment sessions are needed to achieve optimal results.
This potent formulation specifically targets bioremodelling rather than just temporary hydration, creating structural improvements that last months rather than weeks.
Why does the non-BDDE technology make HA injectable moisturiser safer?
Non-BDDE technology creates a more biocompatible product that integrates better with your natural tissues.
This thermal cross-linking method reduces inflammatory responses and decreases the risk of granuloma formation compared to traditional BDDE cross-linked products.
The technology allows for smoother integration and more natural-feeling results while maintaining the product’s structural integrity.
It also contributes to the treatment’s excellent safety profile and reduces the likelihood of delayed complications or lumps forming months after treatment.
What makes BAP (Bio Aesthetic Points) technique different from traditional injection methods?
The BAP technique uses only 10 strategically placed injection points on the face, compared to traditional methods that require 30-50 injection sites.
These specific points were scientifically chosen to avoid major blood vessels and nerve branches, reducing bruising risk significantly.
The technique allows the HA to spread naturally across larger areas, covering the entire treatment zone more effectively.
This targeted approach means less discomfort, faster treatment time, and better distribution of the moisturising effects throughout your facial tissues.
How long do HA injectable moisturiser results typically last?
Results from a single treatment session last approximately 6 months, though individual variation occurs based on age, skin condition, and lifestyle factors.
The recommended protocol involves two treatments spaced 4 weeks apart, which can extend results to 8-12 months total.
Younger patients with better skin quality often experience longer-lasting effects, while those with more advanced aging may need maintenance treatments every 6 months.
The bioremodelling effects continue working even as the HA gradually breaks down, providing sustained skin quality improvements.
Is HA injectable moisturiser treatment painful compared to other injectables?
Most patients find HA injectable moisturiser significantly less painful than traditional filler treatments because it uses only 10 injection points.
The needle is very fine, and topical numbing cream is applied 20 minutes before treatment to minimise discomfort.
The quick injection technique means each point takes only seconds, and the entire face treatment is completed within 15-20 minutes.
Patients typically describe the sensation as brief pinpricks rather than sustained pain, with most rating discomfort as 3-4 out of 10.
What aftercare routine should I follow post-HA injectable moisturiser treatment?
Avoid touching or massaging the treated areas for 24 hours to allow proper product settlement.
Skip makeup for the first 12 hours and use gentle, fragrance-free skincare products for the first week.
Apply ice packs for 10 minutes every few hours on day one if you experience swelling.
Avoid saunas, steam rooms, and intense workouts for 48 hours to prevent excessive sweating.
Sleep with your head slightly elevated for the first two nights to minimize swelling
Use SPF 30+ sunscreen daily to protect your investment.
How should I prepare my skin before HA injectable moisturiser treatment?
Stop using retinoids, vitamin C serums, and exfoliating acids 3 days before treatment to reduce skin sensitivity.
Avoid blood-thinning medications like aspirin or fish oil for one week if medically safe to do so, as these increase bruising risk.
Come to your appointment with clean, makeup-free skin and stay well-hydrated in the days leading up to treatment.
Schedule your session when you can avoid important social events for 2-3 days afterward in case of minor swelling or bruising at injection sites.
When can I expect to see results from HA injectable moisturiser treatment?
Initial skin hydration improvements appear within the first week, but significant bioremodelling results develop gradually over 4 weeks.
You’ll notice your skin feeling more supple and hydrated within days, while the collagen and elastin stimulation effects become visible around week 2-3.
The most dramatic improvements in skin texture, firmness, and overall quality peak at the 4-week mark when the L-HA and H-HA hybrid has fully integrated.
Some patients report continued improvements up to 6 weeks post-treatment as the bioremodelling process completes.
